Integration of Sustainable Value Stream Mapping (Sus. VSM) and Life-Cycle Assessment (LCA) to Improve Sustainability Performance

Taufik Djatna, Dwi Prasetyo

Abstract


Sustainable manufacturing concept is adopted by many stakeholders for its framework, on considering environmental, social, and economic aspect, called as triple-bottom-line (TBL). It concerns the future of manufacturing review on sustainability and requires deeper evaluation on TBL and product life cycle as well as to see the environmental impact at process stage. In this  work, a proposed Sustainable Value Stream Mapping (Sus-VSM) as an extended traditional VSM   considers integration with Life-Cycle Assessment (LCA) to assess current condition in addition to analyze future sustainability improvement at a food based manufacturing. The current state presented all metrics associated with the TBL of manufacturing metrics. Calculation of critical metrics using the Borda Count Method (BCM) showed that speed-loss, total defect product, and heat loss were critical and chosen for further analysis. Analysis using 5 Whys analysis showed that the problems were mainly caused by the unstable material condition, the problem of filling area machinery, and operator disciplinary. Process life-cycle assessment was performed using Simapro v. 8.0 with  single score cooking and cleaning. It obtained 60 700 Pt and 108 Pt. Future improvement using Failure Mode and Effect Analysis (FMEA) proposed and could reduce lead time from 4967.46 seconds to 4759.17 seconds, cleaning time from 2.8 hours to 2.14 hours, and total defect product from 4.85/batch to 2.82 kg/batch. Future improvement on steam performance proposed and could reduce the total single score of cooking and cleaning to 59 500 Pt and 102 Pt.

Keywords


sustainable value stream mapping; life-cycle assessment; failure mode and effect analysis; speed loss; total defect product; heat loss.

Full Text:

PDF

References


A.A. Feil and D. Schreiber., “Sustainability and sustainable development: unraveling overlays and scope of their meanings,†Cadernos EPABE.BR., Vol. 14 No. 3, pp. 667-681, 2017.

P. N. Rao, Sustainable Manufacturing – Principles, Applications, and Directions, Cedar Falls, USA, University of Northen Iowa, 2013.

M. Rojek and Nowosielska, Social Responsibility of Organizations Directions of Changes, Wrocław, Poland, Publishing House of Wrocław University of Economics, 2015.

M. Rother and J. Shook, Learning to See: Value Stream Mapping to Add and Eliminate Muda, Massachusetts, USA, The Lean Enterprise Institute, 1999

W. Faulkner and F. Badurdeen, “Sustainable value stream mapping (Sus-VSM): methodology to visualize and assess manufacturing sustainability performance,†Journal of Cleaner Production, 30, pp. 1-11, 2014.

S. Vinodh, B. Ruben and P. Asokan, “Life cycle assessment integrated value stream mapping framework to ensure sustainable manufacturing: a case study,†Clean Techno Environ Policy. Springer, 2015.

[GFN] Global Footprint Network, “Glossary,†http://www.footprintnetwork.org (Accessed 2 July 2018)

B. Meng and M. Dong, “Research on the lean process reengineering based on value stream mapping for Chinese enterprise,†Management Science and Engineering, Vol. 6 No.2, pp. 103-106, 2012.

D. Locher, Value Stream Mapping for Lean Development: A How-to Guide for Streamlining Time to Market. New York, USA, CRC Press, 2008

University of California Davis, “Thinking lean,†http://oe.ucdavis.edu/Lean/Lean%20Mini%20Conf_10-192015_web%20version.pdf (Accessed 26 July 2018)

M. A. Zahid and H. de Swart, “The Borda majority count,†Inform. Sci. Vol. 295, pp. 429-440, 2015.

B. Andersen and T. Fagerhaud, Root Cause Analysis: Simplified Tools and Techniques, Milwaukee, USA, Quality Press, 2006.

[FFW] Fuel from Waste, “LCA scope and analyzed system boundaries,†http://www.fuelfromwaste.eu/download.html (Accessed 27 July 2018).

PRé., “The Eco-indicator 99: A damage-oriented method for Life Cycle Impact Assessment,†Product Ecology Consultant, 2001.

Y. A. Cengel and A. J. Ghajar, Heat and Mass Transfer, New Delhi, India, Tata McGraw Hill Education Private Limited, 2013.

[CIBSE] Chartered Institution of Building Services Engineers, “The economic thickness of insulation for hot pipes,†http://www.cibse.org/getmedia/3c90596e-89e7-437c-989a (Accessed 13 May 2018).

[TIAC] Thermal Insulation Association of Canada, “Mechanical insulation best practices guide,†http://www.tiac.wa/wp-content/uploads (Accessed 15 May 2018).




DOI: http://dx.doi.org/10.18517/ijaseit.9.4.9302

Refbacks

  • There are currently no refbacks.


Published by INSIGHT - Indonesian Society for Knowledge and Human Development