Properties of DMF-fossil gasoline RON95 blends in the consideration as the alternative fuel
Abstract
Keywords
Full Text:
PDFReferences
M. Elma, S. A. Suhendra, W. Wahyuddin, W. Saputri, and S. A. A. Utami, “Optimum Ratio Between Waste Cooking Oil and Coconut Oilas Raw Material for Biodiesel Production,†Int. J. Adv. Sci. Eng. Inf. Technol., vol. 7, no. 4, pp. 1227–1233, 2017.
A. T. Hoang, “Prediction of the density and viscosity of biodiesel and the influence of biodiesel properties on a diesel engine fuel supply system,†J. Mar. Eng. Technol., 2018. https://doi.org/10.1080/20464177.2018.1532734.
R. Rasheed, A. Yasar, S. R. Ahmad, A. B. Tabinda, S. A. Khan, and Y. Su, “Bioenergy recovery analysis from various waste substrates by employing a novel industrial scale AD plant,†Energy Sources, Part A Recover. Util. Environ. Eff., vol. 40, no. 16, pp. 1935–1946, 2018.
A. T. Hoang and V. V. Pham, “A study of emission characteristic, deposits, and lubrication oil degradation of a diesel engine running on preheated vegetable oil and diesel oil,†Energy Sources, Part A Recover. Util. Environ. Eff., vol. 41, no. 5, pp. 611–625, 2019.
A. T. Hoang and A. T. Le, “A review on deposit formation in the injector of diesel engines running on biodiesel,†Energy Sources, Part A Recover. Util. Environ. Eff., vol. 41, no. 5, pp. 584–599, 2019.
A. T. Hoang, “Waste heat recovery from diesel engines based on Organic Rankine Cycle,†Appl. Energy, vol. 231, pp. 138–166, 2018.
B. Bakri, “Tobermorite Microstructure Resulted from Reaction of Low Content of Silica of Rice Husk Ash and Quicklime Mixture,†Int. J. Adv. Sci. Eng. Inf. Technol., vol. 8, no. 3, pp. 664–670, 2018.
A. T. Hoang, X. L. Bui, and X. D. Pham, “A novel investigation of oil and heavy metal adsorption capacity from as-fabricated adsorbent based on agricultural by-product and porous polymer,†Energy Sources, Part A Recover. Util. Environ. Eff., vol. 40, no. 8, pp. 929–939, 2018.
S. Jężak, M. Dzida, and M. Zorębski, “High pressure physicochemical properties of 2-methylfuran and 2, 5-dimethylfuran–second generation biofuels,†Fuel, vol. 184, pp. 334–343, 2016.
Y. Román-Leshkov, C. J. Barrett, Z. Y. Liu, and J. A. Dumesic, “Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates,†Nature, vol. 447, no. 7147, p. 982, 2007.
C. M. Cai, T. Zhang, R. Kumar, and C. E. Wyman, “Integrated furfural production as a renewable fuel and chemical platform from lignocellulosic biomass,†J. Chem. Technol. Biotechnol., vol. 89, no. 1, pp. 2–10, 2014.
Z. Fu, Z. Wang, W. Lin, and W. Song, “Conversion of furan derivatives for preparation of biofuels over Ni–Cu/C catalyst,†Energy Sources, Part A Recover. Util. Environ. Eff., vol. 39, no. 11, pp. 1176–1181, 2017.
R. L. McCormick et al., “Properties of oxygenates found in upgraded biomass pyrolysis oil as components of spark and compression ignition engine fuels,†Energy & Fuels, vol. 29, no. 4, pp. 2453–2461, 2015.
Y. Zu et al., “Efficient production of the liquid fuel 2, 5-dimethylfuran from 5-hydroxymethylfurfural over Ru/Co3O4 catalyst,†Appl. Catal. B Environ., vol. 146, pp. 244–248, 2014.
S. Nishimura, N. Ikeda, and K. Ebitani, “Selective hydrogenation of biomass-derived 5-hydroxymethylfurfural (HMF) to 2, 5-dimethylfuran (DMF) under atmospheric hydrogen pressure over carbon supported PdAu bimetallic catalyst,†Catal. Today, vol. 232, pp. 89–98, 2014.
Z. Cheng et al., “Experimental and kinetic modeling studies of low-pressure premixed laminar 2-methylfuran flames,†Proc. Combust. Inst., vol. 36, no. 1, pp. 1295–1302, 2017.
H. Xu and C. Wang, “A Comprehensive Review of 2, 5-Dimethylfuran as a Biofuel Candidate,†Biofuels from Lignocellul. Biomass Innov. beyond Bioethanol, pp. 105–129, 2016.
M. A. Eldeeb and B. Akih-Kumgeh, “Recent Trends in the Production, Combustion and Modeling of Furan-Based Fuels,†Energies, vol. 11, no. 3, p. 512, 2018.
X. Ma, C. Jiang, H. Xu, H. Ding, and S. Shuai, “Laminar burning characteristics of 2-methylfuran and isooctane blend fuels,†Fuel, vol. 116, pp. 281–291, 2014.
H. Wei et al., “Experimental investigation on the combustion and emissions characteristics of 2-methylfuran gasoline blend fuel in spark-ignition engine,†Appl. Energy, vol. 132, pp. 317–324, 2014.
F. Eslami, M. L. Wyszyński, A. Tsolaskis, H. Xu, S. Norouzi, and K. Dearn, “Experimental investigation on lubricity of 2, 5-dimethylfuran blends,†Silniki Spalinowe, vol. 51, pp. 3–10, 2012.
E. Hu, X. Hu, X. Wang, Y. Xu, K. D. Dearn, and H. Xu, “On the fundamental lubricity of 2, 5-dimethylfuran as a synthetic engine fuel,†Tribol. Int., vol. 55, pp. 119–125, 2012.
A. T. Hoang and M. T. Pham, “Influences of heating temperatures on physical properties, spray characteristics of bio-oils and fuel supply system of a conventional diesel engine,†Int. J. Adv. Sci. Eng. Inf. Technol., vol. 8, no. 5, 2018.
M. T. Pham, A. T. Hoang, A. T. Le, A. R. M. S. Al-Tawaha, V. H. Dong, and V. V. Le, “Measurement and prediction of the density and viscosity of biodiesel blends,†Int. J. Technol., vol. 9, no. 5, pp. 1015–1026, 2018.
W. W. Pulkrabek, Engineering fundamentals of the internal combustion engine. Pearson Prentice Hall Upper Saddle River, 2014.
A. T. Hoang, Q. V. Tran, A. R. M. S. Al-Tawaha, V. V. Pham, and X. P. Nguyen, “Comparative analysis on performance and emission characteristics of an in-Vietnam popular 4-stroke motorcycle engine running on biogasoline and mineral gasoline,†Renew. Energy Focus, vol. 28, pp. 47–55, 2019.
DOI: http://dx.doi.org/10.18517/ijaseit.8.6.7214
Refbacks
- There are currently no refbacks.
Published by INSIGHT - Indonesian Society for Knowledge and Human Development