Magnesium Reduction from Thanhhoa Dolomite by Ferrosilicon and Ferro-Silicocalcium as Reducing Agent
Abstract
Keywords
Full Text:
PDFReferences
N. Sezer, Z. Evis, S. M. Kayhan, A. Tahmasebifar, and M. Koç, “Review of magnesium-based biomaterials and their applications,†J. Magnes. Alloy., vol. 6, no. 1, pp. 23–43, Mar. 2018, doi: 10.1016/j.jma.2018.02.003.
T. Xu, Y. Yang, X. Peng, J. Song, and F. Pan, “Overview of advancement and development trend on magnesium alloy,†J. Magnes. Alloy., vol. 7, no. 3, pp. 536–544, Sep. 2019, doi: 10.1016/j.jma.2019.08.001.
R. Viswanathan, S. Ramesh, and V. Subburam, “Measurement and optimization of performance characteristics in turning of Mg alloy under dry and MQL conditions,†Measurement, vol. 120, pp. 107–113, May 2018, doi: 10.1016/j.measurement.2018.02.018.
X. Li, W. Yu, J. Wang, and S. Xiong, “Influence of melt flow in the gating system on microstructure and mechanical properties of high pressure die casting AZ91D magnesium alloy,†Mater. Sci. Eng. A, vol. 736, pp. 219–227, Oct. 2018, doi: 10.1016/j.msea.2018.08.090.
E. Aghion and G. Golub, “Production Technologies of Magnesium,†in Magnesium Technology, Berlin/Heidelberg: Springer-Verlag, pp. 29–62.
F. Gao, Z. Nie, Z. Wang, X. Gong, and T. Zuo, “Life cycle assessment of primary magnesium production using the Pidgeon process in China,†Int. J. Life Cycle Assess., vol. 14, no. 5, pp. 480–489, 2009, doi: 10.1007/s11367-009-0101-9.
T. E. Norgate, S. Jahanshahi, and W. J. Rankin, “Assessing the environmental impact of metal production processes,†J. Clean. Prod., vol. 15, no. 8–9, pp. 838–848, 2007, doi: 10.1016/j.jclepro.2006.06.018.
M. S. Mahmoud and T. Yabe, “Silicothermic reduction of MgO using diode laser: Experimental and kinetic study,†J. Magnes. Alloy., vol. 5, no. 4, pp. 430–438, 2017, doi: 10.1016/j.jma.2017.10.002.
Y. Wada et al., “Smelting Magnesium Metal using a Microwave Pidgeon Method,†Sci. Rep., vol. 7, 2017, doi: 10.1038/srep46512.
Y. Tian et al., “Comparative evaluation of energy and resource consumption for vacuum carbothermal reduction and Pidgeon process used in magnesium production,†J. Magnes. Alloy., Dec. 2020, doi: 10.1016/j.jma.2020.09.024.
N. Xiong, Y. Tian, B. Yang, B. qiang Xu, T. Dai, and Y. nian Dai, “Results of recent investigations of magnesia carbothermal reduction in vacuum,†Vacuum, vol. 160. pp. 213–225, 2019, doi: 10.1016/j.vacuum.2018.11.007.
J. Peng, N. Feng, S. Chen, Y. Di, X. Wu, and W. Hu, “Experimental and thermodynamical studies of MgO reduction with calcium carbide,†Zhenkong Kexue yu Jishu Xuebao/Journal Vac. Sci. Technol., vol. 29, no. 6, pp. 637–640, 2009, doi: 10.3969/j.issn.1672-7126.2009.06.10.
Y. Tian et al., “Experimental study on the reversion reaction between magnesium and CO vapor in the carbothermic reduction of magnesia under vacuum,†in Minerals, Metals and Materials Series, 2018, vol. Part F7, pp. 165–170, doi: 10.1007/978-3-319-72332-7_25.
B. Chubukov, S. Rowe, A. Palumbo, I. Hischier, and A. Weimer, “Experimental investigation of continuous magnesium production by carbothermal reduction,†in Minerals, Metals and Materials Series, 2017, vol. Part F8, pp. 199–202, doi: 10.1007/978-3-319-52392-7_30.
D. Fu, T. Zhang, Z. Dou, and L. Guan, “A new energy-efficient and environmentally friendly process to produce magnesium,†Can. Metall. Q., vol. 56, no. 4, pp. 418–425, 2017, doi: 10.1080/00084433.2017.1361178.
H. Ma, Z. Wang, Y. Wang, and D. Wang, “Phase transformation involved in the reduction process of magnesium oxide in calcined dolomite by ferrosilicon with additive of aluminum,†Green Process. Synth., vol. 9, no. 1, pp. 164–170, 2020, doi: 10.1515/gps-2020-0017.
M. Bugdayci, A. Turan, M. Alkan, and O. Yucel, “Effect of Reductant Type on the Metallothermic Magnesium Production Process,†High Temp. Mater. Process., vol. 37, no. 1, pp. 1–8, Jan. 2018, doi: 10.1515/htmp-2016-0197.
C. W. Bale et al., “FactSage thermochemical software and databases, 2010–2016,†Calphad, vol. 54, pp. 35–53, Sep. 2016, doi: 10.1016/j.calphad.2016.05.002.
V. V. Quyen, V. T. T. Trang, N. D. Nam, T. D. Huy, and D. N. Binh, “Research on the manufacturing magnesium from thanhhoa dolomite by pidgeon process,†EUREKA, Phys. Eng., vol. 2020, no. 6, pp. 97–107, 2020, doi: 10.21303/2461-4262.2020.001383.
J. You and Y. Wang, “Reduction mechanism of Pidgeon process of magnesium metal,†Guocheng Gongcheng Xuebao/The Chinese J. Process Eng., vol. 19, no. 3, pp. 560–566, 2019, doi: 10.12034/j.issn.1009-606X.218236.
T. Zhang, “Investigation on the reaction between MgO–CaO–CaF2 and Al–C powders to extract magnesium under atmospheric pressure,†J. Magnes. Alloy., vol. 7, no. 2, pp. 328–334, 2019, doi: 10.1016/j.jma.2019.03.001.
DOI: http://dx.doi.org/10.18517/ijaseit.12.2.14788
Refbacks
- There are currently no refbacks.
Published by INSIGHT - Indonesian Society for Knowledge and Human Development