A Review of Preliminary Experimental Factors of Making Geopolymer Paste as a Passive Fire Protection System

Fransisca Maria Farida, Adang Surahman, Ananta Sofwan

Abstract


A decrease in the elastic modulus and yield strength due to the creep process is the changes contained in the material that is burning. One strategy to counter this is by using passive fire protection systems. The system is built into the structure to control the fire by using building materials and does not require any special operations in the event of a fire. This study is a review of a new study of passive fire protection systems. This research report contains a review regarding the preliminary study of the manufacture of fireproof new materials from industrial waste that is economical and environmentally friendly. Manufacture of new materials is made to overcome deficiencies in fire-resistant material that exists today. The purpose of this study is to analyze experimental factors, which are influence the making of experimental new fireproof material that is smart and innovative materials for civil engineering. Geopolimerization method that is used in this study comes from the development of brick manufacturing method as one of the fire-resistant material that exists today. The main results of this study are the major factors that influence the making of pasta geopolymer as passive fire protection. The discussion will be related to the elements of determinant manufacture of fire-resistant geopolymer paste. The conclusion is factors that supporting the manufacture of new fire-resistant material with geopolymer method.

Keywords


Passive fire protection system; geopolymer paste; experimental factor

Full Text:

PDF

References


Buchanan., Structural design for fire safety, John Wiley and Sons LTD, Chichester, 2009.

Strong, A.B., Plastics: materials and processing, ed. 3, Pearson Prentice Hall, New Jersey, 2006.

Groover, M.P., Fundamentals of modern manufacturing: materials, processes and systems, ed. 3, John wiley & sons inc., USA, 2013.

Temuujin, J., Rickard, W., Lee, M., Riessen, A. V., “Preparation and thermal properties of fire-resistant metakaolin-based geopolymer-type coatingsâ€, Journal of non-crystalline solids, vol. 357, pp. 1399-1404, Mar. 2011.

Zhang, I., “Production of bricks from waste materials-a reviewâ€, Construction and building material, vol. 47, pp. 643-655, Oct. 2013.

Monteiro, S. N. dan Vieira, C. M.F., “On the production of fired clay bricks from waste materials: a critical updateâ€, Construction and building material, vol. 68, pp.599-610, Oct. 2014.

Duxson, P., Jimenez, A. F., Provis, J. L., Lukey, G. C., Palomo, A., Van Deventer, J. S. J., “Geopolymer technology: the current state of the artâ€, Journal Material Science, vol. 42, pp. 2917-2933, May 2007.

Cheng, H., Lin, K. L., Cui, R., Hwang C. L., Cheng T. W., Chang, Y. M., “Effect of solid-to-liquid ratios on the properties of waste catalyst-metakaolin based geopolymersâ€, Construction and Building Materials, vol. 88, pp. 74-83, July 2015.

Bakharev, T., “Resistance of geopolymer materials to acid attackâ€, Cement and Concrete Research, vol. 35, pp. 658-670, Apr. 2005.

Komnitsas, K.A., “Potential of geopolymer technology towards green buildings and sustainable citiesâ€, Procedia Engineering, vol. 21, pp. 1023-1032, https://doi.org/10.1016/j.proeng.2011.11.2108, 2011.

McLellan, B. C., Williams, R. P., Lay, J., Riessen, A.V., Corder, G. D., “Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cementâ€, Journal of Cleaner Production, vol. 19, pp. 1080-1090, July 2011.

Temuujin, J., Minjigmaa, A., Rickard, W., “Thermal properties of spray-coated geopolymer-type compositionâ€, Journal of Thermal Anal. Calorim., vol. 107, pp. 287-292, July 2011.

Allison, P. G., Weiss jr, C. A., Moser, R. D., Diaz, A. J., Rivera, O.G., Holton, S. S., “Nanoindentation and sem/edx characterization of the geopolymer-to-steel interfacial transition zone for a reactive porcelain enamel coatingâ€, Composites Part B, vol. 78, pp. 131-137, March 2015.

Ikeda, K., “Consolidation of mineral powders by the geopolymer binder technique for materials useâ€, Journal of the Mining and Materials Processing Institute of Japan, vol. 114, pp. 497-500, 1998.

Xu, H. dan Deventer, J.S.J.V., “The geopolymerisation of alumino-silicate mineralsâ€, International Journal Mineral Process, vol. 59, pp. 247-266, June 2000.

Van Jaarsveld, J. G. S., Van Deventer, J.S.J, Schwartzman, A., “The potential use of geopolymeric materials to immobilize toxic metals: part II. Material and leaching characteristicsâ€, Mineral Engineering, vol. 12(1), pp. 75-91, Jan. 1999.

Van Jaarsveld, J. G. S., Van Deventer, J.S.J, Lorenzen, L., “The potential use of geopolymeric materials to immobilise toxic metals: part I. theory and applicationsâ€, Mineral Engineering, vol. 10(7), pp. 659-669, July 1997.

Cheng, T., W. dan Chiu, J. P., “Fire resistant geopolymer produced by granulated blast furnace slagâ€, Minerals engineering, vol. 16, pp. 205-210, Dec. 2002.

Krivenko, P. V., Pushkareva, Ye. K., Sukhanevich, M. V., Guziy, S. G., “Fireproof coatings on the basis of alkaline aluminium silicate systems, development in strategic materialsâ€, in Ceramic Engineering Science Proceeding, paper 29.10, p. 129-142, Jan 2009.

Temuujin, J., Minjigmss, A., Rickard, W., Lee, M., Williams, L., Riessen, A. V., “Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriersâ€, Applied Clay Science, vol. 46, pp. 265-270, Aug. 2009.

Temuujin, J., Minjigmaa, A., Rickard, W., Lee, M., Williams, L., Riessen, A. V., “Fly ash based geopolymer thin coatings on metal substrates and its thermal evaluationâ€, Journal of Hazardous Materials, vol. 180, pp. 748-752, May 2010.

Temuujin, J., Rickard, W., Lee, M., Riessen, A. V., “Preparation and thermal properties of fire-resistant metakaolin-based geopolymer-type coatingsâ€, Journal of non-crystalline solids, vol. 357, pp. 1399-1404, Oct. 2010.

Luna-Galiano, Y., Cornejo, A., Leiva, C., Vilches, L.F., Fernandez-Pereira, C., “Properties of fly ash and metakaolin based geopolymer panels under fire resistance testâ€, Materiales de construccion, vol. 65(319), pp. 59, Sept. 2015.

Riessen, A. V., Rickard, W., Sanjaya, J., 15-Thermal properties of geopolymer, Ser. Woodhead Publishing in Civil and Structural Engineering, Woodhead Publishing, 2009, pp. 315-342.

Cioffi, R., Maffucci, L., Santoro, L., “Optimization of geopolymer synthesis by calcination and polycondensation of a kaolinitic residueâ€, Resources, Conservation and Recycling, vol. 40, pp. 27-38, Dec. 2003.

Xu, H., Deventer, J.S.J.V., Lukey, G.C., “Effect of alkali metal on the preferential geopolymerization of stilbitc/ kaolinitc mixturesâ€, Ind. Eng. Chem. Res., vol. 40, pp. 3749-3756, July 2001.

Duxson, P., Provis, J. L., “Designing precursors for geopolymer cementsâ€, Journal of Am. Ceram. Soc., vol. 91, pp. 3864-3869, Nov. 2008.

Casey, W. H., Westrich, H. R., Holdren, G.R., “Dissolution rates of plagioclase at pH = 1 and 3â€, Am. Mineral, vol. 76, pp. 168-173, Jan. 1991.

Davidovits, J., Geopolymer-Chemistry & Application, 4th ed., Institute Geopolymere, Saint-Quentin, France, Nov. 2015.

Sabbatini, A., Vidal, L., Pettinari, C., Sobrados, I., Rossignol, S., “Control of shaping and thermal resistance of metakaolin-based geopolymersâ€, Materials and design, vol. 116, pp. 374-385, Dec. 2016.

Nikolov, A., Rostovsky, I., Nugteren, H., “Geopolymer materials based on natural zeoliteâ€, Case studies in construction materials, vol. 6, pp. 198-205, March 2017.

Brown, W. H., Poon, T., Introduction to Organic Chemistry, International Student Version, Fifth Edition, John Wiley & Son, Inc., 2014.

Zhang, H. Y., Kodur, V., Qi, S. L., Cao, L., Wu, B., “Development of metakaolin-fly ash based geopolymers for fire resistance applicationsâ€, Construction and Building Materials, vol. 55, pp. 38-45, Feb. 2014.

Abdel-Ghani, N. T., Elsayed, H. A., Abdel Moeied, S., “Geopolymer synthesis by the alkali-activation of blast furnace steel slag and its fire-resistanceâ€, Housing and Building National Research Center, http://dx.doi.org/10.1016/j.hbrcj.2016.06.001, pp. 1-6, June 2016.

Sakkas, K., Panias, D., Nomikos, P. P., Sofianos, A. I., “Potassium based geopolymer for passive fire protection of concrete tunnels liningsâ€, Tunnelling and Underground Space Technology, vol. 43, pp. 148-156, June 2014.

Van Deventer, J.G.S., Van Deventer, J.S.J., Lukey, G.C., “The effect of composition and temperature on the properties of fly ash-and kaolinite-based geopolymersâ€, Chem. Eng. J., vol. 89, pp. 63-73, Oct. 2002.

Davidovits, J., 1988, Geopolymer Chemistry and Properties. In: Davidovits, J., Orlinsky, J. (Eds.), Proceedings of Geopolymer ’88, Compiegne, pp. 25-88.

Davidovits, J., 1999, “Chemistry of geopolymeric systems terminologyâ€, In: Proceedings of the 2nd International conference on Geopolymer ’99, terminology, In: Proceedings of the 2nd International conference on Geopolymer ’99, 1999, pp. 9-39.

Mroz, K., Hager, I., Korniejenko, K., “Materials solutions for passive fire protection of buildings and structures and their performances testingâ€, Procedia Engineering, vol. 151, pp. 284-291, Aug. 2016.

Karakoc, M.B., Turkmen, I., Maras, M. M., Kantarci, F., Demirboga, R., “Sulfate resistance of ferrochrome slag based geopolymer concreteâ€, Ceramics International, vol. 42, pp. 1254-1260, Sept. 2015.

Suksiripattanapong, C., Ang-Kua, T., Arulrajah, A., Maghool, F., Horpibulsuk, S., “Strength and microstructure properties of spent coffee grounds stabilized with rice husk ash and slag geopolymersâ€, Construction and Building Materials, vol. 146, pp. 312-320, Apr. 2017.

Jin, M., Zheng, Z., Sun, Y., Chen, L., Jin, Z., “Resistance of metakaolin-MSWI fly ash based geopolymer to acid and alkaline environmentsâ€, Journal of Non-Crystalline Solids, vol. 450, pp. 116-122, Aug. 2016.

Zhang, Z., Provis, J. L., Reid, A., Wang, H., “Mechanical, thermal insulation, thermal resistance, and acoustic absorption properties of geopolymer foam concreteâ€, Cement & Concrete Composites, vol. 62, pp. 97-105, June 2015.

Yan, B., Duan, P., Ren, D., “Mechanical strength, surface abrasion resistance and microstructure of fly ash-metakaolin-sepiolite geopolymer compositesâ€, Ceramics International, vol. 43, pp. 1052-1060, Oct. 2016.

Bhutta, A., Borges, P. H. R., Zanotti, C., Farooq, M., Banthia, N., “Flexural behavior of geopolymer composites reinforced with steel and polypropylene macro fibersâ€, Cement and Concrete Composites, vol. 80, pp. 31-40, March 2017.

Roviello, G., Ricciotti, L., Ferone, C., Colangelo, F., Tarallo, O., “Fire resistant melamine based organic-geopolymer hybrid compositesâ€, Cement & Concrete Composites, vol. 59, pp. 89-99, March 2015.

Zeng, S., Wang, J., â€Characterization of mechanical and electrical properties of geopolymers synthesized using four locally available fly ashesâ€, Construction and Building Materials, vol. 121, pp. 386-399, June 2016.

Sanjayan, J. G., Nazari, A., Pouraliakbar, H., “FEA modeling of fracture toughness of steel fiber-reinforced geopolymer compositesâ€, Materials and Design, vol. 76, pp. 215-222, March 2015.

Sakkas, K., Sofianos, A., Nomikos, P., Panias, D., “Behaviour of passive fire protection K-Geopolymer under successive severe fire incidentsâ€, Materials, vol. 8, pp. 6096-6104, Sept. 2015.

Sadek, D. M., “Effect of cooling technique of blast furnace slag on the thermal behavior of solid cement bricksâ€, Journal of Cleaner Production, vol. 79, pp. 134-141, May 2014.

Rickard, W. D. A., Vickers, L., Riessen, A. V., “Performance of fiber reinforced, low-density metakaolin geopolymers under simulated fire conditionsâ€, Applied Clay Science, vol. 73, pp. 71-77, Nov. 2012.

Rickard, W. D. A., Riessen, A. V., “Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fireâ€, Cement & Concrete Composites, vol. 48, pp. 75-82, Sept. 2013.

Khan, M. I., Azizli, K., Sufian, S., Man, Z., “Sodium silicate-free geopolymers as coating materials-Effects of Na/Al and water solid ratios on adhesion strengthâ€, Ceramics International, vol. 41, pp. 2794-2805, Okt. 2014.

Chiang, Y. W., Santos, R. M., Elsen, J., Meesschaert, B., Martens, J. A., Gerven, T. V., “Towards zero-waste mineral carbon sequestration via two-way valorization of ironmaking slagâ€, Chemical Engineering Journal, http://dx.doi.org/10.1016/j/cej.2014.03.104, March 2014.

Martin, A., Pastor, J. Y., Palomo, A., Jumenez, F., “Mechanical behavior at high temperature of alkali-activated aluminosilicates (geopolymers)â€, Construction and Building Materials, vol. 93, pp. 1188-1196, May 2015.

Said, M., Faizal, M., “The effect of fire retardant composition on burning path and determination of thermal resistance of sawdust for building insulationâ€, International Journal on Advance Science Engineering Information Technology, vol. 7(4), pp. 1134-1140, ISSN 2088-5334, http://dx.doi.org/10.18517/ijaseit.7.4.2288, 2017.

Elyaries, G. M., “Thermal performance assessment of shipping container architecture in hot and humid climatesâ€, International Journal on Advance Science Engineering Information Technology, vol. 7(4), pp. 1114-1126, ISSN 2088-5334, http://dx.doi.org/10.18517/ijaseit.7.4.2235, 2017.

Afrah, B. D., Sajjakulnukit, B., Bustan, M.D., “Product competitiveness of upgrading brown coal (UBC) process in Indonesiaâ€, International Journal on Advance Science Engineering Information Technology, vol. 7(4), pp. 1289-1295, ISSN 2088-5334, http://dx.doi.org/10.18517/ijaseit.7.4.2488, 2017.

Putri, R. E., Yahya, A., Adam, N. M., Aziz, S. A., “Correlation of moisture content to selected mechanical properties of rice grain samplesâ€, International Journal on Advance Science Engineering Information Technology, vol. 5(5), pp. 264-267, ISSN 2088-5334, http://dx.doi.org/10.18517/ijaseit.5.5.561, 2015.

Nurhadi, N., Efendi, M. A. A., Rianda, S., “The utilization of fixed bed coal gasification by-products to produce combustible gas by auto-thermal processâ€, International Journal on Advance Science Engineering Information Technology, vol. 7(5), pp. 1964-1969, ISSN 2088-5334, http://dx.doi.org/10.18517/ijaseit.7.5.2104, 2017.




DOI: http://dx.doi.org/10.18517/ijaseit.11.2.4193

Refbacks

  • There are currently no refbacks.


Published by INSIGHT - Indonesian Society for Knowledge and Human Development